AQUARIO NEO CO2 Starter
Aquario
$59.99
(No reviews yet)
Write a Review
Aquario
AQUARIO NEO CO2 Starter
What is Neo CO2?
Carbon is an essential nutrient required by plants to grow. The best way to supply aquarium plants with the carbon they need is through carbon dioxide (CO2).
The Aquario NEO CO2 Starter is the perfect solution for your CO2 needs. The simple instructions and ease of use allow any beginner or experienced hobbyist to achieve the best plant growth by introducing CO2 to their aquarium. The Aquario NEO CO2 Starter utilizes a natural and proven concept to provide the right amount of CO2 suitable for planted aquariums for up to 50-60 days.
Set include:
1 x NEO CO2 Bottle
1 x NEO CO2 Bio Powder
1 x Aquario NEO CO2 Diffuser
1 x CO2 Tubing
2 x Suction Cups
1 x O-Ring
Step 1: Water
Pour 300ml of warm (about 40-50℃) water into the Bottle.
Step 2: Shake
Close the cap, and shake at least 100 times until thoroughly mixed.
Step 3: Wait
Leave the Bottle in a quiet and safe place, and do not interrupt for 24 hours.
During this time, the Bottle content starts turning into a gel.
Step 4: Activate
After 24 hours, when the Bottle content turned into gel, put in 1 sachet of NEO CO2 Bio and 1 cup (about 200ml) of room temperature water (about 30℃ ). Install the reaction cap onto the Bottle, and do not shake. Connect the flexible pipe to the reaction cap and the diffuser. Install the CO2 diffuser in the aquarium. Wait until CO2 is produced.
Step 5: Repeat
When CO2 release slows or stops, remove the cap from the Bottle and pour the liquid from the gel surface. Repeat step 4 until the gel is fully consumed.
